Control Settings (Nb-Moodels); Thermostat; Timer - Sawotec ARI HEATER ROUND Bedienungsanleitung

CoNTRoL SETTINgS (Nb-moodELS)

THERmoSTAT

Adjust the temperature of the sauna by simply turning the operating knob. Thermostat
support automatically the choosen temperature. In case the heater overheats, the safety
sensor will automatically stop the heater even if the timer is on. Find out for what reason
the heater overheated. The reason for this could be too tightly or too loosely placed
sauna stones, heater´s location or inappropriate ventilation. Exposure of the sensor to
the glowing heating element may cause sensor to overheat. Find out the reason for
overheating and fix the problem before resetting the safety sensor. The reset button hole
is located near the thermostat knob.

TImER

The timer has 1-6 (white) hours presetting time and 1-4 (pink) hours operating time.
To start the heater at once, turn the knob to anywhere between 1-4 on the operating time
scale. The heater will start and remain on for the time selected.
To preset the timer, simply turn the knob to anywhere between 1-6. When the specific
number of hours is reached, the heater will start running and stay on for up to 4 hours if
you don't turn it off earlier.
13
DEUTSCH| ENGLISH