Before Installation - Beko HIML 95225 SXE Anleitung

3 Installation
Product must be installed by a qualified
person in accordance with the regulations
in force. The manufacturer shall not be held
responsible for damages arising from pro-
cedures carried out by unauthorized per-
sons which may also void the warranty.
Preparation of location and electrical
and gas installation for the product is
under customer's responsibility.
DANGER:
The product must be installed in
accordance with all local gas and/or
electrical regulations.
DANGER:
Prior to installation, visually check if
the product has any defects on it. If
so, do not have it installed.
Damaged products cause risks for
your safety.

Before installation

The hob is designed for installation into
commercially available work tops. A safety
distance must be left between the applian-
ce and the kitchen walls and furniture. See
figure (values in mm).
•
It can also be used in a free standing
position. Allow a minimum distance of
750 mm above the hob surface.
•
(*) If a cooker hood is to be installed
above the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height (min 650 mm)
•
Remove packaging materials and
transport locks.
•
Surfaces, synthetic laminates and
adhesives used must be heat resistant
(100 °C minimum).
•
The worktop must be aligned and fixed
horizontally.
•
Cut aperture for the hob in worktop as
per installation dimensions.
41/EN