Technical Specifications; Injector Table - Beko HIML 95225 SXE Anleitung

Technical specifications

Burners
Voltage / frequency
Cable type / section
Cable length
Category of gas product
Gas type / pressure
Converting the gas type / pressure optio-
nal
Rear left / Normal burner
Front left / Normal burner
Middle / Wok burner
Front right / Auxiliary burner
Rear right / Rapid burner
Total gas consumption
Gas consumption NG G25.3 - 25 mbar /
NG G25 - 25 mbar
Gas consumption
External dimensions (height / width /
depth)
Installation dimensions (width / depth)
Technical specifications may be
changed without prior notice to imp-
rove the quality of the product.
Figures in this manual are schematic
and may not exactly match your
product.

Injector table

Hob zone
Gas type / Gas pressure
NG G25.3 - 25 mbar
NG G25 - 25 mbar
NG G20 - 20 mbar
NG G20 - 20 mbar / G25 - 25 mbar
LPG G30 - 30mbar
LPG G30 - 28...30 mbar / G31- 37 mbar
This appliance was configured for the
appliance category K (I2K) and is suitab-
le for the use of G and G+ distribution
NG G20 - 20 mbar
LPG G30 - 30mbar
Auxili-
ary
burner
1 kW
0,80 mm
0,72 mm
0,50 mm
Inox
HIML 95225 SXE
5 Gas Burner
220-240 V ~
50-60Hz
H05V2V2-F
3 x 0,75 mm2
maks. 1.5 m
Cat II 2E+3+
Cat I 2E
NG
G20 - 20 mbar / G25 - 25
mbar
G30- 28...30mbar / G31-
37mbar
1,75 kW
1,75 kW
4.17 kW(NG), 4.0kW(LPG)
1 kW
3 kW
11,67 kW (NG),
11,50 kW (LPG)
-
-
836 g/h
97x910x510 mm
860 mm/490 mm
Values stated on the product labels
or in the documentation accompan-
ying it are obtained in laboratory
conditions in accordance with rele-
vant standards. Depending on opera-
tional and environmental conditions
of the product, these values may
vary.
Normal Rapid
burner burner
1.75 kW
1,02 mm 1,30 mm
0,97 mm 1,15 mm
0,65 mm 0,87 mm
gases according to the specifications as
included in the NTA 8837:2012 Annex D
with a Wobbe index of 43.46 – 45.3 MJ/m3
Inox
HIML 95225 SXE NL
5 Gas Burner
220-240 V ~
50-60Hz
H05V2V2-F
3 x 0,75 mm2
maks. 1.5 m
Cat II 2E (43.46 -45.3 MJ/m3
(0°C))3B/P
Cat II 2L3B/P
NG
G25.3- 25 mbar
G25.- 25 mbar
G20-20 mbar
G30-30mbar
1,75 kW
1,75 kW
4.17 kW(NG), 4.0kW(LPG)
1 kW
3 kW
11,67 kW (NG),
11,50 kW (LPG)
-
-
-
836 g/h
97x910x510 mm
860 mm/490 mm
Wok
burner
3 kW (4.17 kW)
1.51 mm
1,50 mm
-
Wok
burner
(4 kW)
-
-
1,01
mm
39/EN