CLEANING
Removing and cleaning the wire guides
Cleaning oven ceiling
EN 28
Only use conventional cleaners to clean the guides.
• Remove the screw using a screwdriver.
• Remove the guides from the holes in the back wall.
Make sure the spacers fitted on the wire guides are not lost.
Replace the spacers after cleaning; otherwise, sparks may appear.
To facilitate the cleaning of the ceiling the oven is equipped with the
foldable infrared heater. Before cleaning remove all baking/roasting
dishes, grids and guides.
Disconnect the appliance from the power mains.
• The heater can be folded down by loosening the fixing screw
located at the front part of oven ceiling.
Never use the heater in the lowered position!
The heater must have cooled down; otherwise, there is danger of
burns.