Diamond Selection - Husqvarna PG 530 Bedienungsanleitung

Full set of single segments
Full set of twin segments
• Presence of water.
• Number of segments under the machine.
• Adding an additional abrasive (e.g. sand, silicone
carbide) on the fl oor will increase wear.
Generally speaking, the faster a diamond segment
wears, the faster the productivity will be.
By varying the above factors, changes can also be
made to effect the following:
• Scratch pattern.
• Current draw of machine.
• Flatness of fl oor (see next section).
• Ease of operation.
18
- English

Diamond selection

Diamond Holder Disc
Position for Diamond segment
Diamond selection
The following section covers important factors to
consider when selecting the diamond segment you are
going to use for a given application.
Grinding disc set-up
They way diamond segments are set-up on the grind-
ing heads of the machine will also greatly infl uence the
performance of the machine, the productivity levels and
also the fi nished fl oor quality.
There are basically two types of diamond confi gura-
tions that can be used when using the grinder:
1. Full set of diamonds – when there are diamonds
placed at each of the six positions on the diamond
holder discs (see pictures above).
2. Half set of diamonds – when there are diamonds
placed at three alternating positions on the diamond
holder discs (see pictures above).
Half set of single segments
Half set of twin segments