Optional Accessories - Makita PC5010C Betriebsanleitung

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
• Offset diamond wheel (Dry type)
• Dust cover brush
► Fig.38
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 Do not use Super flange and Ezynut together.
NOTE: *3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
Wheel Guard (for grinding wheel)
Inner flange / Super flange
Depressed center wheel / Flap disc
Lock nut / Ezynut *1*2
Wheel Guard (for cut-off wheel) *3
Abrasive cut-off wheel / Diamond wheel
16 ENGLISH
125 mm (5") model
Grip 36
Back up pad
Flex wheel
Rubber pad 115
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench