Operation; Maintenance; Optional Accessories - Makita PC5000C Bedienungsanleitung

Dust bag
Fig.12
To install dust bag, slip onto dust port. Always make
sure to slip onto dust port all the way until it stops so
that it does not come off during operation.
Remove dust bag when it begins to touch cutting
surface. This is a sign that it is full. Failure to empty bag
will lead to poor suction/pickup.
Connecting a vacuum cleaner
Fig.13
When you wish to perform clean planing operation,
connect a Makita vacuum cleaner to your tool as shown
in the figure.

OPERATION

Fig.14
Always use the top grip (auxiliary handle) and firmly
hold the tool by top grip and switch handle during
operations.
Planing in corners
For PC5000C
Flush planing of corners is possible after first removing
the dust cover cap.
For PC5001C only
Fig.15
Before performing the flush planing of corners, remove
the hex bolt which secures roller holder and base holder
and then take away the whole roller holder.
Next, loosen the hex socket head bolt and take away
the dust cover cap and then adjust the dust cover in a
proper position according to your work.
Fig.16

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Replacing carbon brushes
Fig.17
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
Fig.18
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Offset diamond wheel (Dry type)
•
Dust cover brush
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
9
or attachments
Only use accessory or
are