Step 1-: Connecting A 5.1Ch Sound Device - Sony DR-GA500 Bedienungsanleitung

Step 1-: Connecting a 5.1ch Sound Device
Connect the 5.1ch jacks of the processor by the supplied multi-channel cable. The EFFECT
function provides 7.1ch extended surround output from a 5.1ch input source.
1
Connect the processor to the
sound device as illustrated below.
Connecting jacks of the sound
device*
MIC IN
Connect to MIC IN jack
L/R OUT
Connect to L/R OUT jack
Surround L/R OUT
Connect to SL/SR OUT jack
Center/Subwoofer OUT
Connect to C/SW OUT jack
Not connected
* The jack name varies depending on the sound
device.
Rear panel of processor
2
Slide the INPUT switch to "5.1ch."
3
Set the 5.1ch speaker mode in the computer.
For details on operation of your computer/sound device, refer to the operating instructions
for it.
Do not connect the USB cable with multi-channel cable at the same time when you connect
the processor to the computer. The computer sound setting may be switched to an
unintended device.
Cable
plug
names
MIC

L / R

 SL / SR
C / SW

 SBL / SBR
Front panel of
processor
Multi-channel cable
(supplied)
Connection
9
GB