Performing The Inhalation - Pari BOY SX Gebrauchsanweisung

• Connect the power cord to the
power cord socket of the
compressor.
• Fill the nebuliser as described in
the instructions for use of the
nebuliser.
• Plug the power plug into a suitable
socket.
Liquids can conduct, ...2
WARNING
Liquids can conduct electricity, thereby posing a risk of electric
shock. Therefore, never take hold of the power cord or the
power plug with damp or wet hands.

3.3 Performing the inhalation

To avoid overheating the compressor, never place a cover over
the device during operation, and ensure that the side ventilation
slits are not obstructed. If the compressor is covered or if the
ventilation slits are blocked, the compressor cannot be cooled
properly.
Perform the inhalation as follows:
• Before starting the treatment, pull
the nebuliser out of the holder.
- 37 -
en