Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Bosch PFZ 1400 AE Bedienungsanleitung

pfz_gb_3609929854_t.fm Seite 4 Freitag, 18. Januar 2002 11:38 11

Maintenance and Cleaning

Before any work on the machine itself, pull the
I
mains plug.
For safe and efficient working, always keep the ma-
I
chine and the ventilation slots clean.
Clean the sword and the saw blades after finishing the
work.
The saw blades slide on wear-free, hard metal guides
and should not be lubricated to ensure optimum dust
extraction.
Replace cracked, bent or dull saw blades.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Strain relief
Live = brown
Neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
If the machine should fail despite the care taken in
manufacture and testing, repair should be carried out
by an authorised customer services agent for Bosch
power tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.
Accessories
Saw blade set for wood . . . . . . . . . . 2 608 632 119
Saw blade set for light building
material, hard metal inserts . . . . . . . . 2 608 632 122
3 609 929 854 • (02.01) T

Environmental Protection

Recycle raw materials instead of disposing as
waste.
The Machine, accessories and packaging should be
submitted for environment-friendly recycling.
These instructions are printed on recycled paper man-
ufactured without chlorine.
The plastic components are labelled for categorized
recycling.
To be fitted
by qualified
professionals only
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 50 144 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specification subject to alteration without notice
English–4

Declaration of conformity

Dr. Gerhard Felten Dr. Eckerhard Strötgen