DeWalt DE7187 Bedienungsanleitung Seite 20

E N G L I S H
• Extreme temperature changes cause movement
of internal parts that may affect the accuracy of
the attachment. Regularly check the accuracy while
using the attachment under these circumstances.
Also refer to the instruction manual of
your power tool.
Switching on and off (fig. A)
• To switch on the laser press the on/off switch (1)
into position „I".
• To switch off the laser press the on/off switch (1)
into position „0".
Performing a cut
• Draw a cutting line on the workpiece.
• Place the workpiece against the fence.
• Switch on the laser.
• Align the cutting line with the laserline.
• Switch on the tool and perform the cut.
• After completing the cut, switch off the tool and
wait for the saw blade to come to a complete
standstill before returning the head to its upper
rest position.
• Switch off the laser.
Maintenance
Your attachment has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Cleaning
Regularly clean the attachment with a soft cloth.
• The adjustment screws on the laser head can
become clogged with sawdust. Use some low
pressure air to clear the adjustment screws.
• When necessary, clean the lens using a soft cloth
or a cotton bud soaked in alcohol. Do not use
any other cleaning agents.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
20
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase
a new product.
D WALT provides a facility for the collection and
E
recycling of D WALT products once they have reached
E
the end of their working life. To take advantage of this
service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local D
at the address indicated in this manual. Alternatively,
a list of authorised D WALT repair agents and full
E
details of our after-sales service and contacts are
available on the Internet at: www.2helpU.com
WALT product
E
WALT office
E