Kathrein UFSconnect 926 Kurzanleitung Seite 55

7.2.5 Setting the Type of Reception
Tip
Check the correct cable connection at the back of the receiver (LNB1 IN / LNB2
IN).
Tip
At delivery, the receiver is set to DiSEqC 1.0 with Two feeds.

1. Press to select the Reception icon.
➯ The Reception submenu opens.
2. Select a connection configuration:
– Single feed from LNB/multi-switch
– Two feeds from LNB/multi-switch
(delivery status)
or
– SCR/SCD2 OneCable LNB/multi-
switch
➯ The selected configuration is being
set up.

3. Press to close the submenu.
23 of 32