Sony UP-D2600S Gebrauchsanweisung Seite 21

Notes
• Do not turn off the power during printing. If you do so, paper may not be ejected
and may jam in the printer.
• Do not pull the paper out till the printer finishes printing.
• Do not leave the printouts more than 10 sheets on the paper cover. Doing so may
cause jamming.
To stop printing midway
Send the command or press the STOP button to stop printing.
The printer returns to standby status.
If the printer does not print
The printer will fail to print in the following cases when the ALARM, PAPER,
and/or RIBBON indicator light.
For details, see "Indicators on the Front Panel" page 25.
When using the Self-laminating Color Printing Pack UPC-2040A
When the thermal head is cool, such as when making a first printout after switching
on the printer, the printer preheats the head until it is sufficiently hot to start
printing.
The print lamp blinks slowly during preheating. The printer automatically starts
printing when the thermal head is sufficiently heated.
Notes
When storing your printouts:
• Avoid storing the printout in a location subject to high temperatures, high
humidity, excessive dust and direct sunlight.
• Do not stick tape on a printout. Also, avoid leaving a plastic eraser on a printout
or placing a printout in contact with materials which contain plasticizer (under a
desk mat, for example).
• Do not allow alcohol or other volatile organic solvents to come into contact with
the printouts.
21
Operation