Presentation; Ws 462 - Husqvarna WS 462 Bedienungsanweisung

WS 462

It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator's manual as a valuable document. By following its'
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you will sell this machine, make sure that the buyer will get the
operator's manual.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
General
WS 400 is a series of completely new complete wall saws
from Husqvarna. The intention when developing the
Husqvarna WS 400 series has been to produce a very light
yet powerful wall saw that is easy for one person to handle
using modern production methods and high performance
materials.
Among the new features on the WS 400 series is the
possibility to secure the blade radially on the saw. As the saw
unit is mounted on a carriage using a quick-action mounting
instead of directly on the rail, assembly of the saw is
significantly easier.
8 –
English

PRESENTATION

To utilises the input effect in the best possible way the saw is
mounted on Husqvarna' the latest rail. This is a very stable
rail, which allows the saw to be controlled more precisely,
which in turn results in more efficient cutting. As the
equipment's component parts work with small losses and as
the blade is moved in 50 mm closer to the rail compared to
earlier models, which has also resulted in a saw with an
extremely compact design and at the same time as efficiency
has increased.
Complete saw equipment consists of:
• One saw
• One track 1.2 m
• One track 2 m
• Four wall mountings
• One track holder
• One connector
• One blade guard 800 or one blade guard 1000
• One blade guard guide
• One tool kit
• One bottle of Husqvarna oil 150
Transport cases for the different units The saw carriage is
mounted on both the long and short rails at the factory to
make cutting as easy as possible.
As a large part of the sawing work consists transporting, the
saw equipment is supplied in specially produced cases. The
cases provide good protection during transport and reduced
the number of packages that need to be moved between the
workplaces, which makes the work more effective.