Massoth eMOTION XLS Konfigurationsanleitung Seite 51

Attachment 1: CV 51, 52, 54, 56, 113, 115 function output commands
Value Application
0 = Switch function with light key,
0...16
1 ... 16 = Switch function with F-key No. 1-16
+ 64 Switching output "on" in reverse Only
+ 128 Switching output „on" in forward Only
Attachement 2: CV 53, 112 - Dimming function A1, A2, A3, A4
Value Application
Voltage in Percent of Track Voltage on Output
1... 32
(Both outputs dimmed)
(1... 32)
A1 resp. A3 is dimmed only
+ 64
(1... 32)
A2 resp. A4 is dimmed only
+ 128
+192 both
Attachment 3: CV 55, 57, 114, 116 - Special functions A1, A2, A3, A4
Value Application
0 0 = Steady „on"
Flashing symmetrical
1 - 15
(Time base 0,25 sec/value)
Short term function (Monoflop)
+ 64
(Time base 0,25 sec/value)
+ 128 Asymmetric flashing (1/3 on, 2/3 off)
+ 192 Asymmetric flashing (2/3 on, 1/3 off)
Note
additional value must be added
additional value must be added
Note
1 Unit = approx. 3% of track voltage
1 = 3% of track voltage (0.75V)
32 = 100% track voltage (24V)
S1 = value in CV53
S3 = value in CV112*
S2 = value in CV53
S4 = value in CV112*
Note
(Standard operation)
symmetric flashing
output switches off after time
out
additional value must be added
short „on", long „off"
additional value must be added
short „off", long „on"
additional value must be added
51