Massoth eMOTION XLS Konfigurationsanleitung Seite 37

Table of configuration variables
CV Description
Function outputs in analog mode
13
(On if value set)
15 Programming Lock
16 Programming Lock
17 Long loco address (High Byte)
18 Long loco address (Low Byte)
19 Multiple Unit Address
29 NMRA configuration
Bit Value
Bit 0 1
Bit 1 2
Bit 2 4
Bit 4 16
Bit 5 32
37 MTB-Command Alloc. SUSI Funct. 17
38 MTB-Command Alloc. SUSI Funct. 18
39 MTB-Command Alloc. SUSI Funct. 19
40 MTB-Command Alloc. SUSI Funct. 20
41 MTB-Command Alloc. SUSI Funct. 21
42 MTB-Command Alloc. SUSI Funct. 22
43 MTB-Command Alloc. SUSI Funct. 23
44 MTB-Command Alloc. SUSI Funct. 24
47
Buffer runtime (analog / digital)
48 Starting threshold analog operation
OFF (Value 0)
standard driving direction
14 speed steps
digital operation only
internal driving curve
short address (CV 1)
D A Range Note:
A1 = 1, A2 = 2, A3 = 4,
A4 = 8, A5 = 16, A6 = 32,
3 √ 0...255 A7 = 64, A8 = 128
Add the values to the
desired functions!
--- 0...255 Key
--- 0...255 Lock (Attachment 4) read only
128...
128 if CV 29 bit 5 = 1
10239
1... 99 +128 for inverted direction
4 √ bitwise programming
ON
reverse driving direction
28 speed steps
digital + analog operation
programmable driving curve
long address (CV 17/18)
* please refer to the sound sheet
0 = light function key
*
1...28 = function key
*
30 = function not active
*
31 = function always on
*
*
*
*
10 √ 1... 240 buffer operation only
(0.125 sec. per value)
60 0...120
37