Herunterladen Inhalt Inhalt Diese Seite drucken

Massoth eMOTION XLS Konfigurationsanleitung Seite 16

Vorschau ausblenden Andere Handbücher für eMOTION XLS:
Inhaltsverzeichnis

Werbung

so wird die Zeitdauer zwischen
zwei Regelvergleichen vergrö-
ßert. Es wird somit seltener
nachgeregelt. Je nach Motortyp
und Getriebeart kann eine von
beiden Veränderungen sinnvoller
sein. Der Decoder greift je nach
Fahrsituation intern ein und kann
die Regelung zusätzlich begrenzen.
CV 62 ist die Nachregelbegren-
zung. Diese legt fest, ob der
Decoder bis zur Volllast nachre-
geln darf oder nur bis zu einem
bestimmten Leistungsoffset.
Steht der Wert zum Beispiel auf
128 so wird die Nachregelung
auf 50% begrenzt. Wird diese
Grenze erreicht, regelt der Decoder
nicht noch weiter nach und die
Lok wird unter großer Last etwas
langsamer. Die Lastregelung ist in
CV 49 abschaltbar (Bit1, Wert2).
CV 63 ist eine CV-Einstellung ,
die nur für den Langsamfahr-
bereich gilt. Um ein weicheres
Fahrverhalten zu erreichen, ist
die Regelcharakteristik für den
Langsamfahrbereich langsamer als
die normale Regelung. In CV 63
wird in 16er-Schritten festgelegt
(16, 32, 48 ... 254), bis zu welcher
Fahrstufe diese spezielle Regelung
16
less frequently. You may have to
optimize these settings depending
on the motor type used and the
type of gears used. In addition the
decoder may in certain situations
limit the control characteristics.
CV 62 is the readjustment strength.
It sets the limit for the decoder for
readjusting (e.g. up to maximum
power or only to a certain power
limit). In case CV 62 is set to "128"
the readjustment is limited to
50%. In case the limit is reached
the decoder will stop adjust-
ing and the locomotive will slow
down when the load is increased.
Load control may be switched
off in CV 49 (Bit1, Value2).
CV 63 is a special CV defining
the driving characteristics of
slow driving. A slower adjust-
ing characteristic results in a
smoother slow speed operation.
CV 63 defines the speed range for
slow driving in increments of 16
speed steps (16, 32, 48 ... 254).
Higher speeds utilize the setting
defined in CV 61. The adjusting
time defines the regulating speed in
the slow speed range. It may vary
between 1 (fast) and 15 (slow).

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis