Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
01
OFF
N.B. – When performing the procedure, you can cancel the memorisation at any time by keeping the n and s keys pressed simultaneously for 4 seconds Alternatively,
do not press any keys and wait 60 seconds for the motor to perform 6 movements.
5.10 - Locking and unlocking the memory
This procedure allows you to lock or unlock the memory to prevent accidental memorisation of other transmitters not included in the system.
Before starting the procedure, bring the awning/shutter to a point half-way along its course.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the s key pressed and wait for the motor to perform 4 movements. Upon completion, release the key.
03. Keep the n key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
04. Keep the s and t keys pressed simultaneously and wait for the motor to perform 3 movements. Upon completion, release the keys.
05. • To lock the memory: keep the s key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
• To unlock the memory: keep the t key pressed and wait for the motor to perform 5 movements. Upon completion, release the key.
01
5
sec.
04
5
sec.
N.B. – When performing the procedure, you can cancel the memorisation at any time by keeping the n and s keys pressed simultaneously for 4 seconds Alternatively,
do not press any keys and wait 60 seconds for the motor to perform 6 movements.
01
PRG
1
sec.
04
5
sec.
9 – Inglese
02
white
white-black
02
2
3
––– Procedure 5.10 ––– executable only with a series transmitter Era P and Era W
02
PRG
1
2
sec.
4
03
04
ON
5
4
sec.
05
5
sec.
05
5
sec.
03
PRG
1
2
sec.
05
5
sec.
05
5
sec.
01
02
03
04
procedure 5.9.1
03
5
3
sec.
3
5
3
3
5
05
Werbung
Inhaltsverzeichnis
