Setup Menu; 7.6.1 Time Setting; System Setting - Philips DSR 300/00 Benutzerhandbuch

7.6

Setup menu

The Setup menu is used to modify the basic settings of your
receiver, including the clock time and general settings, such
as Video and Audio output.

7.6.1 Time Setting

This feature is used to set the local time offset with respect
to actual local time normally obtained from the network.
- Select the Time Setting item from the System sub-menu to
access the Time Setting screen.
- Select the appropriate offset value (from -12 to +12).To
help you set the offset value, the names of capital cities for
which the selected value is valid are displayed at the
bottom of the screen.
- Press <OK> to store the selected value and go back to
the previous screen or <BACK> to cancel and the screen.
In case the information supplied by the satellite is not
correct, the Time Setting screen is used to set the actual
date and time using the arrow or numerical keys of the
remote control as appropriate.
7.6.2

System Setting

Note: your TV settings will be overwritten by the receiver settings.
This feature is used to set the system settings.
- Select the System Setting item from the Setup menu to
access the System Setting screen.
- Select appropriate values for the following:
• Menu Language: Dutch, English, French, German
(default value), Italian, Polish and Turkish
• Audio Language: Dutch, English, French, German
(default value), Italian, Polish and Turkish
• Screen Format: 4:3 or 16:9 (wide screen)
• TV Video Output: RGB (default value) or CVBS
• VCR Video Output: S-VHS or CVBS
• Start On Channel, which is tuned when you activate
your receiver from Standby
Note: if not enabled (None), the default value is the last
channel you watched before you put your receiver on
Standby
MENU 27