Recording Timer; Reminder; Sleep Timer - Philips DSR 300/00 Benutzerhandbuch

26 MENU
7.5.1

Recording timer

Select the Record Timer item from the Timer sub-menu or
press the <TIMER> key of the remote control to access the
Recorder screen.
To activate a recording timer:
- Set the values of the recording parameters using the
arrow keys or numerical keys as appropriate.
- Press <OK> to confirm.
Note: an existing recording timer can be disabled by selecting
Disable as Timer Type in the Recorder screen.
Note: do not forget to enable recording on your VCR.
7.5.2

Reminder

When you set a reminder for a particular program, the
receiver sends a warning at the start of that program and
switches automatically to the right channel if you accept the
reminder message.
Select the Reminder item from the Timer sub-menu to
access the Reminder screen.
To activate a reminder:
- Set the values of the reminder parameters using the arrow
keys or numerical keys as appropriate.
- Press <OK> to confirm.
Note: an existing reminder can be disabled by selecting Disable as
Timer Type in the Reminder screen. When a timer is already active
(recording in progress), press <TIMER> then <0> to cancel this
timer.
7.5.3

Sleep timer

You can set a sleep timer to automatically switch your
receiver to Standby mode after a given time lapse.
Select the Sleep item from the Timer sub-menu to access
the Sleep screen.
To activate a sleep timer:
- Enter the time lapse after which the receiver should go to
Standby using the numerical keys of the remote control.
- Press <OK> to confirm.
To disable a sleep timer:
- Select Disable instead of a time lapse.
- Press <OK> to confirm.