Previous Channel Recall; Tv Or Radio Mode Selection; Volume & Audio Control; Volume Control And Mute - Philips DSR 300/00 Benutzerhandbuch

6.3

Previous Channel Recall

Press the <BACK> key of the remote control to move to
the previous channel you watched in the current channel list.
6.4

TV or Radio Mode selection

While watching satellite TV or listening to satellite radio,
press TV/RADIO on the remote control to toggle between
TV and Radio modes.
6.5 Volume & Audio Control
6.5.1

Volume control and Mute

- To increase or decrease the volume, use <
the remote control.
Note: the volume level can also be controlled from your TV.
- To mute the sound, press <
- To resume normal sound, press this key once again.
Note: change of volume is signalled on-screen using a bargraph,
while audio mute is signalled with an icon in the top right corner
of the screen.
6.5.2

Audio Control

- To access audio settings, select the Setup menu from the
main menu, then select System Setting.The System Setting
screen appears.
- Select Audio Output. Default Audio Output setting is
Stereo.
- Select the desired value (Left, Right, Mono, or Stereo) and
press <OK> to save your changes and exit the screen.
- +
> on
> on the remote control
GENERAL VIEWING FUNCTION 19