Trip Time (Total Time); Max. Speed; Average Speed; Motor Assist - SR Suntour HESC Benutzerhandbuch

SR SUNTOUR OWNERS MANUAL

Trip Time (Total Time)

The trip time (total time) is recorded when the system is turned on and the wheel is running.
Display range: 00:00 .. 99:59 hh:mm / 1 unit = 1 minute
The trip distance can be reset, please refer to "How to reset the trip time"

Max. Speed

The "max speed" indicates the maximal ever ridden speed.
Display range: 0.0 .. 60.0km/h / Display accuracy: 0.1km/h
The trip distance can be reset, please refer to "How to reset the maximum speed"

Average Speed

The "average speed" indicates the average ridden speed and is calculted through the following
formular: trip distance / trip time
Please note! If the trip time is 0, the "average speed" cannot be displayed.
Display accuracy: 0.1km/h

Motor assist

The "motor status" indicates the current assist power according to the chosen mode. The motor
status will not be indicated beyond a speed of 26km/h.

Remaining capacity(fuel gauge)

Please note that the indication of the remaining capacity of the battery is getting update while
the motor is inactive
The indication of the remaining capacity of the battery will provide you with precise informa-
tion regarding the remaining power. However this indication might get influenced by various
different outside factors. To avoid any problems please immediately recharge your battery after
the indication starts blinking.
When the main switch is turned on, the battery fuel gauge shows up.
The remaining battery capacity is is represented by illustration as follows.
16
Remaining capacity
100-75%
Remaining capacity
50-25%
HESC components
Remaining capacity
75-50%
Remaining capacity
25-10%