SR SUNTOUR OWNERS MANUAL
To protect the pins of your docking station against moisture and dirt it is is equipped with a cover,
which can be slid over the pins. Always cover the pins after you take off the display!
Do never expose the pins to any kind of metal like tools, coins or hairpins.
This could result into a short circuit and might cause permanent damage. As a result of
this massive heat might build up, this could result into a burning of the display unit.
More over you might expose yourself to an electric shock.
Make sure to turn off the display before removing it
Removing the display before turning off may result into a failure of the system.
The display will save all data, like trip distance and average speed, on a flash memory.
Removing the display before it has been turned off may result in a loss of stored data.
Never expose the display to any kind of static electricity or strong radio waves as it
How to operate the display/user interface
General Information
The user interface / display is located on the handlebar. When the system is switched on by using
the on/off-switch, you can choose among the options below.
Always close the cover after removing the display
might erase all data on your display.
HESC components
11