How To Reset The Trip Distance; How To Reset The Trip Time (Total Time); How To Reset The Maximum Speed; Display Indications - SR Suntour HESC Benutzerhandbuch

SR SUNTOUR OWNERS MANUAL

How to reset the trip distance

1. Switch to "trip distance"
2. Press the "Mode" button that followed press the "Info" button. Afterwards release both
buttons ( the buttons should not remain pressed)

How to reset the trip time (total time)

1. Switch to "trip time"
2. Press the "Mode" button that followed press the "Info" button. Afterwards release both
buttons ( the buttons should not remain pressed)

How to reset the maximum speed

1. Switch to "maximum speed"
2. Press the "Mode" button that followed press the "Info" button. Afterwards release both
buttons ( the buttons should not remain pressed)

Display Indications

Speed

The speed is shown in kilometres per hour.
Display speed range: 0.0 - 60.0km/h * (28inch)
Display accuracy: 0.1km/h
*(The system needs approx. 2.5seconds to recognize the speed of the wheel)

Total Distance

The total distance is counted when the system is activated and
is displayed in kilometres.
Numerical values will get stored on the non-volatile memory.
Value can not be reset manually.

Trip Distance

The trip distance is counting when the system is activated and the front wheel is turning.
Display range: 0.0 .. 999.9km / Display accuracy: 0.1km
The trip distance can be reset, please refer to "How to reset the trip distance"
HESC components
15