Electrolux GA60IEEVWE Benutzerinformation Seite 10

10 www.electrolux.com
German de-
grees (°dH)
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt are
not effective enough to soften
hard water.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is
blank.
2. Press
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
change the setting.
4. Press the on/off button to confirm the
setting.
French de-
grees (°fH)
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and until
,
.
and
continues to
= level 5.
again and again to
mmol/l Clarke de-
grees
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
<0.7
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
and
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is
blank.
2. Press
• The indicators
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
Water softener
level
6
5
4
3
2
< 5
1
and
,
.
and
go off.
continues to flash.
= level 4.
1)
2)
until
and