Max HN90 Betriebsanleitung Seite 13

Adjust Spacer
Adjustment Dial
Deeper Shallow
Trigger lock dial
Arm Cover
Contact Arm
Contact Tip
DRIVING DEPTH ADJUSTMENT DIAL
WARNING:
ALWAYS disconnect air supply before adjustment dial.
q With air pressure set, drive nails into a representative material sample to determine if
adjustment is necessary.
w If adjustment is required, disconnect air supply.
e Refer to the mark on the Adjust Spacer for direction to turn the adjustment dial.
r Reconnect air supply.
TRIGGER LOCK MECHANISM
The tool is equipped with a Trigger Lock Mechanism. Push and rotate the Trigger
LOCK to the Trigger UNLOCK position before driving nails.
Trigger
CONTACT TIP
WARNING:
ALWAYS disconnect air supply before attaching / detaching the contact tip.
Attach the Contact Tip on the tip of Contact Arm, when driving nails to a soft material.
The Contact Tip can be kept on the Arm Cover when not using.
Deeper
13
Shallow