Inhaltsverzeichnis
Werbung
SEQUENTIAL TRIP
The Sequential Trip requires the operator to hold the tool against the work before pulling the Trigger. This
makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications.
The Sequential Trip allows exact fastener location without the possibility of driving a second fastener
on recoil, as described under "Contact Trip".
The Sequential Trip Tool has a positive safety advantage because it will not accidentally drive a
fastener if the tool is contacted against the work-or anything else-while the operator is holding the
trigger pulled.
CONTACT FIRE OPERATION (CONTACT TRIP)
For contact fire operation, hold the Trigger and depress the Contact Arm against the work surface.
1
2
SINGLE FIRE OPERATION (ANTI-DOUBLE FIRE MECHANISM AND SEQUENTIAL TRIP)
For single fire operation, depress the Contact Arm against the work surface and pull the Trigger. Tool
can not fire a second nail until the Trigger is released and tool can cycle.
2
1
SEQUENTIAL TRIP
Identified by ORANGE TRIGGER.
PROCEDURE
q Hold the Trigger.
w Depress the Contact Arm.
PROCEDURE
q Depress the Contact Arm.
w Pull the Trigger.
12
Werbung
Inhaltsverzeichnis
