8. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
8.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar)
also, but for optimum performance in-
stall this appliance at a location where
the ambient temperature corresponds to
8.2 Rear spacers
8.3 Levelling
2
1
45°
A
45°
2
the climate class indicated on the rating
plate of the appliance:
Cli-
Ambient temperature
mate
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
In the bag with the documentation,
there are two spacers which must be fit-
ted as shown in the figure.
1.
Fit the spacers into the holes. Make
sure that the arrow (A) is positioned
as shown in the picture
2.
Turn counter-clockwise the spacers
through 45° until they lock into
place.
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.
ENGLISH
13