Troubleshooting - auna KaraBig Bedienungsanleitung

No power but POWER
is on.
No power when
plugged in.
No sound from TV.
CD Player does not
work normally
No sound - If audio is
going
through TV or VCR.
No song lyrics appear
on
the TV screen
22

Troubleshooting

AC adaptor is not plugged into a wall
outlet or the connector is not plugged
into the power supply jack on the back
of the unit.
The AC outlet may not have power.
TV system is set to minimum
TV system is powered Off
RCA cords are not connected securely.
Disc is inserted upside down
Disc is dirty
Disc is scratched / warped
A non standard disc is inserted
Moisture inside the CD deck
Karaoke system needs to be reset
Source Selection on TV or VCR is not
correct.
RCA cords are not connected securely
Video cable is not connected properly
to the TV
Source selector on TV is not set to
VIDEO
TV does not have video line input
A CDG is loaded but the CD+G icon is
not lit
Plug the AC adaptor into a wall outlet
and plug the connector into the DC
jack on the unit.
Check the outlet with a working lamp
or other electrical appliance.
Turn up the volume on the TV system
Power the TV system on.
Ensure white and red RCA cords are
securely inserted into into the karaoke
system and the TV system.
Insert the disc correctly
Wipe clean with a soft cloth
Use a new disc
Only use discs bearing correct identi-
fication logo
Wait about 20 - 30 mins to let it dry.
Disconnect the machine from the pow-
er source for 30 seconds then recon-
nect.
Follow directions in "connections"
Ensure white and red RCA cords are
securely inserted into both the karaoke
system and the home stereo system.
Connect the video cable to the kara-
oke system's VIDEO OUT and to the TV
VIDEO IN.
Using your TV remote to select VIDEO
input or select the proper VIDEO input
on the TV itself.
Connect from VIDEO OUT of the sys-
tem to the VIDEO IN on your VCR/
Home theater. Refer to "Making the
Connections. Check the disc to be sure
it is a CD+G
Check the disc to be sure it is clean.
www.auna.de