Operation - auna KaraBig Bedienungsanleitung

LINE IN:
Connect external audio devices to the Line in of
your karaoke machine, using Line-in cable. Make
sure the volume of the used external player is
turned up. Adjust the master volume with your ka-
raoke machine.
MICROPHONES:
Plug a microphone into the MIC1 or MIC2 jack at the
rear of your Karaoke Machine. Microphone signals
are mixed with playback from CD/CD+G. Located
on the microphone, there is an ON/OFF switch. En-
sure you set the ON/OFF switch on the microphone
to ON when required for use.
Please note: Please do not point the microphone
head directly to the front of the speaker(s) on the
unit when you are singing, it would cause unwanted
feedback sound that may affect the performance of
your unit.
POWER ON/OFF: To turn on the Karaoke Machine, press the POWER button once, the POWER indicator
will light up to full brightness and TFT. To turn off the system, press the POWER button again. The power
indicator and TFT screen will turn off.
MASTER VOLUME: Rotate to the MASTER VOLUME control to obtain the desired sound level.
SELECTING THE AUDIO SOURCE: Press FUNCTION button to toggle between CDG, USB, BT, Line in modes.
LIGHT EFFECT: Press LIGHT ON/OFF button once to switch on LED light effect. Press the button again to
switch off.
Open the CD door and place a disc in the CD compartment with the printed side facing up. Gently close the
CD Door. Insert USB drives with MP3 files into the USB port.

Operation

CD/USB Operation
19
www.auna.de