Troubleshooting - auna 10026825 Bedienungsanleitung

User instructions

Troubleshooting

In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below.
If the problem persists, contact the retailer if the machine is still under guarantee.
PROBLEM
No power when POWER
is on.
No power when plugged
in.
No sound from TV or
amp
CD Player does not work
normally or the LED
displays "NO", "E", or
"00".
No sound - If audio is
going through TV
No sound - when audio
is connected to an
amplifier
No song lyrics appear
on the TV screen
No sound from mic
Page 8
POSSIBLE CAUSE
•
No power plug connection at the AC outlet.
•
Improper connection between the unit and
the AC power adaptor.
•
The AC outlet may not have power.
•
TV or PA system is set to minimum.
•
TV or PA system is powered Off.
•
Cables not connected securely.
•
Disc is inserted upside down.
•
Disc is dirty.
•
Disc is scratched.
•
Disc is warped.
•
A non standard disc is inserted.
•
Moisture has formed inside the CD deck.
•
Karaoke system need resetting.
•
Source selection on TV is not correct.
•
Cables are not connected securely.
•
Source selection on your amp is not set
correctly.
•
Improper connection to amplifier.
•
Cables are not connected securely.
•
Video cable is not connected properly to
the TV.
•
Input not set correctly on your TV.
•
A CDG is loaded but the CD+G LED is
not lit.
•
Mic volume control is set to minimum.
•
Mic is off
SOLUTION
•
Insert the power plug into the AC outlet
•
Check the connection between the unit
and the AC power adaptor.
•
Check the outlet with a working lamp or
other electrical appliance.
•
Turn up the volume on the TV or amp.
•
Power the TV or amp on.
•
Ensure white and red AV cables are
connected correctly into both the karaoke
system and the TV/Amp.
•
Insert the disc correctly.
•
Wipe clean with a soft cloth.
•
Use a new disc.
•
Use a new disc.
•
Only use discs bearing the standard logo
as described on page 6.
•
Wait about 20 - 30 mins to let it dry out.
•
Disconnect the machine from the power
source for 30 seconds, then reconnect.
•
Follow directions on page 4.
•
Ensure white and red AV cables are
connected correctly into both the karaoke
system and the TV
•
Select the input you connected the red &
white cables to on your amp.
•
Follow direction on page 5 for connecting
•
Ensure white and red AV cables are
connected correctly into both the karaoke
system and the TV/Amp.
•
See page 4 for TV connection
instructions.
•
Check the yellow cables input (TV) and
•
Ensure you are using a CDG disc.
•
Adjust the mic volume to MAX, and then
re-adjust to a comfortable level.
•
Turn on the mic with the ON/OFF switch
located on the mic.
18