Operation - auna Rockstar Plus Bedienungsanleitung

OPERATION

Connecting to Line-in jack
1. Press the POWER button (4) to turn the unit on.
2. Insert the 3.5 mm audio cable (not included) into the AUX IN jack (22) of
the unit.
3. Press the MODE button (4) on the front panel to switch to AUX IN mode.
4. Use the controls on the connected device to begin playing audio routed
through the unit.
Disco Lights
There are three light modes as follows:
Light Mode 1: The unit will synchronize to the music being played or
•
with the sound when you speak or sing into the microphone.
Light Mode 2: The unit will light up with random colours and patterns.
•
Light Mode 3: The light effects will be turned off.
•
NOTE: When the unit is turned on, the Light mode 1 is automatically
activated. Press Light mode button (10) to switch to Light mode 2, and press
again to turn off the light.
Playing a CD
1. Press the POWER button (4) to turn the unit on.
2. Lift open the CD door and insert a CD (with standard or MP3+G files) or
a CD+G by gently pressing it on the center spindle. Then close the CD
door.
What is a CD+G?
What is an MP3+G?
3. Repeatedly press the MODE button (4) to select the CDG/CD mode;
"CD READING" will appear on the screen when searching the disc and
then the total number of tracks will appear.
A CD+G (CD+Graphics) is the standard format for
most karaoke discs that will display the words
on the screen.
MP3+G is the newest format for karaoke music
utilizing the MP3's small file size. It will display
the words on the screen.
EN
25