Mounting; General Instructions For Use Of The Instrument; Mounting Instructions - Balluff BMD 1L series Kurzanleitung

3 Mounting

Protection against mois-
ture
Installation position
6
3 Mounting
3.1

General instructions for use of the instrument

Protect your instrument against moisture ingress through the following
measures:
•
Use the recommended cable (see chapter "Connecting to power
supply")
•
Tighten the cable gland
•
gland points downward
•
Loop the connection cable downward in front of the cable gland
This applies mainly to outdoor installations, in areas where high
To maintain the housing protection, make sure that the housing lid is
closed during operation and locked, if necessary.
"Technical data
3.2

Mounting instructions

(19.7 in).
During operation, the probe must not touch any installations or the
nearly down to the lowest point of the bottom. Keep in mind that
measurement all the way down to the tip of the probe may not be pos-
in chapter "Technical data" of the operating instructions.
Fig. 2: Vessel with conical bottom
-