Notes For Operation; Technical Data - Truma iNet Box Gebrauchsanweisung

Notes for operation

To operate the appliances connected via the Truma iNet Box,
follow the steps in the Truma App.
– The Truma iNet Box flashes during start-up and is not ready
for operation until the operation LED lights up continuously.
– The last incoming command is executed.
– Bluetooth communication has priority over GSM
communication.
– The Truma iNet Box automatically switches from GSM
to Bluetooth communication as soon as a saved mobile
terminal device comes into reception range.
– It automatically switches back to GSM communication
when the device goes out of reception range.
– Successful control requires the controlling device to be
ready for operation
– The Truma iNet Box can also be operated without a
Mini-SIM card. This restricts its use to close range via
Bluetooth.
– If the Truma iNet Box is not used for an extended period,
Truma recommends disconnecting the operating voltage to
the Truma iNet Box.
– If you leave your vehicle for an extended period and want
to keep the Truma iNet Box ready for operation, make sure
that the power supply is sufficient for the required time,
bearing in mind the power consumption of all the active
appliances.

Technical data

Power supply
Voltage range
Average
power consumption
SIM card type
Interfaces
Bluetooth
Dimensions (L x W x H)
Weight
(without accessories)
Temperature
External GSM antenna
12 V / 24 V
min. 8 V, max. 30 V
40 mA (12 V), 20 mA (24 V)
Mini-SIM (25 x 15 mm)
TIN-Bus
(2 x TIN1 replaceable, TIN2)
GSM
Bluetooth
Class 2
147 x 96 x 40 mm
approx. 150 g
-30 °C to +60 °C
Antenna gain max. 5.5 dBi at
850 MHz and max. 2 dBi at
1900 MHz
Subject to technical changes.
19