Alarm Memory - Velleman CTC1000 Bedienungsanleitung

2. Press OK.
If multiple alarms have been raised, the control panel continues displaying the 2nd alarm event with 02). at
the beginning of the 2nd line.
3. Repeat pressing OK until the display shows:
[showing the number reached by the control panel]
4. Press OK.
The display returns to Alarm off.
Or press to review all events.
Remote control
 When an alarm (other than Panic alarm) is raised, pressing the Disarm button on the (optional) remote
control will also stop the alarm.
 A Panic Alarm cannot be silenced from the remote control but needs to be silenced on the control panel.
This is to prevent the remote control from being snatched from the user and silence the alarm using the
Disarm button on the remote.

Alarm memory

If an alarm was raised without being silenced during your absence and the alarm reporting has been carried
out, the screen will stay on the Alarm warning display.
 You cannot reset the display using the remote control.
 To clear the display, follow the same steps as described in chapter 11.7.
11.8 Alarm events and responses
The following table lists the alarm events and how the control panel will respond to them.
Type of
Disarmed
Alarm
Burglar No response
Home Omit No response
Home
No response
Access
Delay No response
Entry Door Chime
Away
Door Chime
Entry
24 HR. Burglar Alarm
V. 01 – 12/06/2013
CTC1000
Away Arm Home Arm
Instant Burglar Instant Burglar
Alarm Alarm
Instant Burglar
No response
Alarm
Instant Burglar
Start Entry Timer No response
Alarm
Instant Burglar Instant Burglar
Alarm Alarm
Start Entry Timer Start Entry Timer No response
Start Entry Timer No response
Burglar Alarm Burglar Alarm
Exit Timer
Instant Burglar
Alarm
No response
No response
No response
Burglar Alarm
31
Away Arm Entry Home Arm Entry
Timer Timer
Instant Burglar Instant Burglar
Alarm Alarm
Instant Burglar
No response
Alarm
No response No response
No response No response
No response No response
No response No response
Burglar Alarm Burglar Alarm
©Velleman nv