Electrolux GA55SLV220 Benutzerinformation Seite 59

Programme
9
Prewash
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 ExtraHygiene
This option gives better results for the hy-
giene. During the rinsing phase, the tem-
perature stays at 70 °C for 10 to 14 mi-
nutes.
Press the ExtraHygiene touchpad:
• If the option is applicable to the pro-
gramme, the related indicator comes
on.
• If the option is not applicable to the
programme, the related indicator flash-
es for some seconds and then stays
off.
5.2 ProBoost
This function increases the water pressure
by 40% and gives better washing results
when dishes are very dirty.
Press the ProBoost touchpad:
• If the option is applicable to the pro-
gramme, the related indicator comes
on.
• If the option is not applicable to the
programme, the related indicator flash-
1) Duration
(min)
10
Energy
(kWh)
0.005
es for some seconds and then stays
off.
5.3 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
• Press the multitab touchpad, the rela-
ted indicator comes on.
• The option stays on until you deactivate
it. Press the multitab touchpad, the re-
lated indicator goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.
ENGLISH 59
Water
(l)
4