Installation - Dometic DM20D Montage- Und Bedienungsanleitung

Installation

6 Installation
6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favoured
alternative (fig. 5, page 5).
Observe the following:
 The cut-out dimensions H x W x D are:
– DM20D: 365 x 384 x 428 mm
– DM20F: 365 x 384 x 426+d mm
d is the thickness of the hotel's own decor
 The clearance between the minibar's back and the furniture wall should
be approx. 10 mm.
 The ventilation openings for the chosen alternative have to be produced
(fig. 5, page 5).
 Air passing through the inlet air duct must not be heated by any heat
sources (heaters, direct sunlight, gas ovens etc.).
➤ Fix the refrigerator in place using suitable screws (fig. 6 1 and 2,
page 6).
6.2 Connecting the minibar electrically
➤ Plug the 230 V connection cable into the AC voltage socket and connect
it to the 230 V AC mains supply.
✓ The status LED lights up.
✓ The minibar starts cooling the interior.
6.3 Mounting hotel's own door decor (DM20F only)
The hotel's own door decor has to comply with the following requirements:
 Maximum weight: 2 kg
 Maximum thickness: 14 mm
➤ Fasten the decor with four screws.
16
DM20
EN