Installation Steps; Package Contents; Optional Accessories - Axis Q1635-E Installationshandbuch

Installation Guide
This Installation Guide provides instructions for installing AXIS Q1635-E Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 16.
4. Install the hardware. See page 19.
5. Access the product. See page 23.
6. Set the focus. See page 23.

Package Contents

• AXIS Q1635–E Network Camera
• 4–pin I/O connector block for connecting external devices
• 2–pin RS485/422 connector block (x2)
• Wall mount
• Torx screwdriver (T20)
• Torx screwdriver bit (T30)
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key

Optional Accessories

For information about available accessories, including power accessories and outdoor housings
see www.axis.com
AXIS Q1635-E Network Camera
9