Specifications - Axis Q1635-E Installationshandbuch

AXIS Q1635-E Network Camera
For SD card recommendations, see www.axis.com
Control Button
For location of the control button, see Hardware Overview on page 10.
The control button is used for:
• Resetting the product to factory default settings. See page 26.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Function Button
The function button has multiple functions:
• Levelling assistant – This function helps to ensure the camera is level. Press the button
for about 3 seconds to start the levelling assistant and press again to stop the leveling
assistant. The status LED and buzzer signal assist levelling of the camera, see Status LED
Behavior and Buzzer Signal for Levelling Assistant on page 23. The camera is level when
the buzzer beeps continuously.
• Focus assistant – This function is used for enabling the Focus Assistant. To enable the
focus assistant, press and very quickly release the button. Press again to stop the focus
assistant. For more information, see page 24.

Specifications

Product Temperature
AXIS Q1635–E –30 °C to 60 °C
(–22 °F to 140 °F)
with PoE
Down to –40 °C (–
40 °F) with Axis High
PoE Midspan, max 30
W
Humidity
10-100% RH (condensing)
16