Specifications - Axis Q1615-E Installationsanleitung

AXIS Q1615-E Network Camera
SD Card Slot
A microSD card (not included) can be used for local recording with removable storage. For more
information, see Specifications on page 16.
NO NO TICE NO TICE TICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To
unmount, go to Setup > System Options > Storage > SD Card and click Unmount.
Note
For SD card recommendations see www.axis.com
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 24.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Function Button
The function button has multiple functions:
• Levelling assistant – This function helps to ensure the camera is level. Press the button
for about 3 seconds to start the levelling assistant and press again to stop the leveling
assistant. The status LED (see page 14) and buzzer signal (see page 14) assist levelling of
the camera. The camera is level when the buzzer beeps continuously.
• Focus assistant – This function is used for enabling the Focus Assistant. To enable the
focus assistant, press and very quickly release the button. Press again to stop the focus
assistant. For more information, see page 22.

Specifications

Product Temperature
AXIS Q1615–E –30 °C to 60 °C
(–22 °F to 140 °F)
with PoE; down to
–40 °C (– 40 °F with
High PoE
Humidity
10-100% RH (condensing)
16