Specifications; Operating Conditions - Axis Q1615-E Mk II Installationsanleitung

Specifications

Operating Conditions

Product Temperature
AXIS Q1615–E -30 °C to 60 °C
Mk II (-22 °F to 140 °F) with PoE; down
to -40 °C (-40 °F) with High PoE
Connectors
I/O connector
4–pin terminal block
For an example diagram, see Connection Diagrams on page 16.
Function Pin
1
0 V DC (-)
2
DC output
3–
Configurable
4
(Input or
Output)
AXIS Q1615-E Mk II Network Camera
Notes
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input – Connect to pin 1 to activate,
or leave floating (unconnected) to deactivate.
Digital output – Connected to pin 1 when
activated, floating (unconnected) when
deactivated. If used with an inductive load,
e.g. a relay, a diode must be connected in
parallel with the load, for protection against
voltage transients.
Humidity RH (condensing)
10–100%
17
Specifications
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open
drain, 100 mA