Zulassungen; Fcc Information - Siemens SIMATIC RF200 IO-Link Series Betriebsanleitung

Technische Daten, RF260R-spezifisch
Antenne
Material
Maße (L x B x H)
Farbe
Befestigung
Gewicht
8.2

Zulassungen

FCC information

Siemens SIMATIC RF210R IO-Link (MLFB 6GT2821-1AC32) FCC ID: NXW-RF210RIOL
Siemens SIMATIC RF220R IO-Link (MLFB 6GT2821-2AC32) FCC ID: NXW-RF220RIOL
Siemens SIMATIC RF240R IO-Link (MLFB 6GT2821-4AC32) FCC ID: NXW-RF240RIOL
Siemens SIMATIC RF250R IO-Link (MLFB 6GT2821-5AC32) FCC ID: NXW-RF250RIOL
Siemens SIMATIC RF260R IO-Link (MLFB 6GT2821-6AC32) FCC ID: NXW-RF260RIOL
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
SIMATIC RF200 IO-Link
Betriebsanleitung, 02/2017, C79000-G8900-C276-05
integriert
Kunststoff PA 6.6
75 x 75 x 41 mm
anthrazit
2 Metall-Schrauben M5;
Anzugsdrehmoment ≤ 1,5 Nm
ca. 200 g
Technische Daten
8.2 Zulassungen
83