Electrolux EUF2740AOW Benutzerinformation Seite 29

CAUTION!
To carry out the following
operations, we suggest that
this be made with another
person that will keep a firm
hold on the doors of the
appliance during the
operations.
1. To change the opening direction of the
door unscrew the upper pin and
screw it on opposite side.
2. Remove the door.
2
3. Remove the plinth.
4. Remove the cap (A) and position it on
the opposite side .
5. Unscrew the lower hinge (C) and the
washers (B).
6. Position the pin and the washers on
the opposite side.
A
1
B
C
7. Re-screw the upper hinge.
8. Refit the door.
9. Unscrew the handles (B) and fix them
on the opposite side (C).
C
10. Re-insert the handle cover pins (A) on
the opposite side.
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make sure
that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature is
cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. In that case, wait
for the natural fitting of the
gasket. In case you do not
want to carry out the above
mentioned operations,
contact the nearest After
Sales Service Force. The
After Sales Service specialist
will carry out the reversibility
of the doors at your cost.
ENGLISH 29
B
A