High Temperature Alarm; Daily Use - Electrolux EUF2740AOW Benutzerinformation

22 www.electrolux.com
FastFreeze indicator
2
Power indicator light
3
Temperature regulator
4
4.2 Switching on
Insert the plug into the wall socket.
Turn the temperature regulator clockwise
to a medium setting.
The power indicator light and the alarm
light will light up.
4.3 Switching off
To switch off the appliance, turn the
Temperature regulator to the "
position.
4.4 FastFreeze function
To activate FastFreeze function, press the
FastFreeze button.
The FastFreeze indicator will light up.
4.5 Temperature regulation
The temperature is regulated
automatically.

5. DAILY USE

A medium setting is generally
the most suitable. However,
the exact setting should be
chosen keeping in mind that
the temperature inside the
appliance depends on:
• room temperature,
• how often the door is
opened,
• the quantity of food
stored,
• the location of the
appliance.
WARNING!
Refer to Safety chapters.
FastFreeze button
5
1. Turn the Temperature regulator
toward lower settings to obtain the
minimum coldness.
2. Turn the Temperature regulator
toward higher settings to obtain the
maximum coldness.
"

4.6 High temperature alarm

In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
alarm light comes on.
When normal conditions are restored the
alarm light will switch off automatically.
CAUTION!
If the ambient temperature is
high or the appliance is fully
loaded, and the appliance is
set to the lowest
temperatures, it may run
continuously causing frost to
form on the rear wall. In this
case the dial must be set to a
higher temperature to allow
automatic defrosting and
therefore reduced energy
consumption.