Zoppas PBM170 Benutzerhandbuch Seite 22

Connecting the appliance to the power supply
• The electrical outlet should be readily accessible
so that the unit can be unplugged easily in an
emergency. Or it should be possible to isolate the
oven from the supply by incorporating a switch in
the fixed wiring in accordance with the wiring
rules.
• The socket should not be positioned behind the
cupboard.
• The best position is above the cupboard, see (A).
• Connect the appliance to a single phase
230 V/50 Hz alternating current via a correctly
installed earth socket. The socket must be fused
with a 10 A fuse.
• The power supply cord may only be replaced by an
electrician.
• Before installing, tie a piece of string to the power
supply cord to facilitate connection to point (A)
when the appliance is being installed.
• When inserting the appliance into the high-sided
cupboard, DO NOT crush the power supply cord.
• Do not immerse the power supply cord or plug in
water or any other liquid.
22
(A)
Electrical connections
WARNING!
THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should this
safety measure not be observed.
If the plug that is fitted to your appliance is not
suitable for your socket outlet, you must call your
local ELECTROLUX service agent.