Electrical Installation - Nibe VPA 200/70 Benutzer- Und Installateurhandbuch

Electrical installation

NOTE
Electrical installation and service must be carried
out under the supervision of a qualified electri-
cian, and in accordance with applicable electrical
safety regulations.
VPA 200/70 can be supplemented with an immersion
heater with a maximum output of 9 kW.
The immersion heater is supplemented with junction
box type K11 (2-pole thermostat, 3-pole temperature
limiter). Do not modify or reconnect!
A separate supply from group central is routed to the
immersion heater.
NOTE
The water heater must be completely filled with
water before it is connected on the electrical
side.
VPA 200/70 | GB 21