Positioning Your Cricut Expression 2 Machine; Power; Screen Calibration - HP Cricut Expression 2 Benutzerhandbuch

positioning your Cricut Expression 2 Machine

Place your Cricut Expression 2 machine at least 12" (30.48 cm) from the edge of your
table to prevent it from tipping and causing possible injury. Allow 24" (60.96 cm) in the
back of the Cricut Expression 2 machine for mat movement.
When positioning your Cricut Expression 2 machine, choose a location that:
• cannot be accessed by children. the Cricut Expression 2 machine is not a toy and
contains components, including a sharp blade, that could be hazardous
to children.
• is a hard, stable, and flat surface within 6 feet (1.83 meters) of a grounded
electrical outlet, and that has a minimum clearance of 24" (60.96 cm) behind the
Cricut Expression 2 machine for paper movement.
• is indoors or in a dry location where the Cricut® cartridges are not directly
exposed to the effects of the weather.
• is away from direct exposure to sunlight or extreme temperatures such as in
parked cars, storage sheds, sunrooms, etc.
WArnInG! Your Cricut Expression 2 machine should never be left or stored outside,
in locations without heat or air conditioning, or in environments where the machine
or cartridges can come in contact with water. It is recommended that your Cricut
Expression 2 machine be maintained in an area with temperatures between 60 and 90 °F
(15.5 and 32.2 °C).

power

Plug the power cord into a grounded electrical outlet. turn the machine on by pressing
the power button located to the right of the screen.

Screen Calibration

Prior to your first use of your Cricut Expression 2 machine, it will run a screen calibration.
Instructions on the screen will walk you through each step of the calibration. You will
only have to complete the calibration process successfully once. If, for some reason, you
wish to recalibrate the machine, please see page 24.
GEttING StARtED 7