Troubleshooting - HP Cricut Expression 2 Benutzerhandbuch

TrOuBLEShOOTInG

problem: the cutting mat didn't load when I pressed the Load button.
Solution: Press the unload Mat button and then reload the mat before pressing the
Cut button again.
problem: the blade is not cutting all the way through the paper.
Solution 1: Adjust the Multi-Cut setting on the cut screen to allow for multiple cuts
along the same cutting lines.
Solution 2: Increase the cut pressure in the Project Preview screen.
Solution 3: the blade depth may need to be adjusted, particularly if you are trying to
cut through thicker materials.
Solution 4: the cutting blade may have become dull and needs to be replaced.
problem: the paper lifts off the mat as the Cricut Expression 2 machine is cutting.
Solution 1: Make sure you press the paper firmly onto the cutting mat when setting
up the cut.
Solution 2: Rinse the mat with water while gently rubbing off the paper lint on the
mat. Let the mat thoroughly dry before attempting to re-use the mat.
Solution 3: try using a new mat. Each mat will last anywhere from 25 to 40 full page
cuts, depending on the size of cuts and the kind of material you are cutting.
problem: the cutting mat is too sticky. It's ripping my paper when I try to remove it.
Solution: Use a craft knife or the Cricut tools (sold separately) to successfully lift
the material from the cutting mat. the Cricut tools are custom designed for lifting,
pulling, or cleaning up cut characters.
problem: My machine doesn't turn on and doesn't appear to be getting any power.
Solution 1: Check the power adapter to make sure that the green power indicator
is lit up. If it is not lit, check to make sure the power plug is completely inserted into
the power adapter.
Solution 2: try to plug the power cord into another outlet.
32
tRoUBLESHootING