NovoPress AXI101 Betriebsanleitung Seite 28

AAP101 / AXI101
EN 5.2 AAP101 pusher tool
5.2.1
Automatic press cycle and release button
The pusher tool features positive control. During compression, the pusher tool remains in the position
reached, even if the start button is temporarily released. When the intended switch-off force is
reached, this is perceptible by means of an increase in the motor speed and a perceptible decrease in
pressure. After releasing the start button, the tool returns to its initial position. For safety reasons, the
positive control is only activated after a minimum force has been achieved. Until this force is achieved,
the pressing process can be interrupted at any time by releasing the start button. The tool then
automatically returns to its initial position.
The release button is used to return the tool to its initial position before the pressing process has been
completed. In order to do this, press the release button until the pusher adapters have moved fully
back.
5.2.2
Rotatable head
The press tool is equipped with a rotatable head. It can only be rotated before the press cycle.
5.2.3
Pusher adapters
The nominal width is inscribed on the pusher adapters. Furthermore, an arrow indicates the installation
direction and a number indicates the order. If the nominal widths for a size are aligned with each other,
the arrows and the numbers will be in line.
24
1. Start button
2. Rechargeable battery
3. Pusher adapters
4. Release button