Short Description - NovoPress AXI101 Betriebsanleitung

AAP101 / AXI101
EN
5.

Short description

5.1 AXI101 expander
5.1.1
Automatic press cycle and release button
The expander features positive control. During expansion, the expander remains in the position
reached, even if the start button is temporarily released. When the intended switch-off force is
reached, this is perceptible by means of an increase in the motor speed and a perceptible decrease in
pressure. After releasing the start button, the tool returns to its initial position. For safety reasons, the
positive control is only activated after a minimum force has been achieved. Until this force is achieved,
the expansion process can be interrupted at any time by releasing the start button. The tool then
automatically returns to its initial position.
The release button is used to return the tool to its initial position before the expansion process has
been completed. In order to do this, press the release button until the expander head has moved
fully back.
5.1.2
Operation at temperatures below -10°C
• Fit the expander head (see Point 6.1).
• Perform a few dry runs with the AXI101.
• The tool is ready for operation.
5.1.3
Expander and rechargeable battery
Notes on the rechargeable battery
Note: The AXI101 expander must only be operated with 9.6 V rechargeable batteries from
Novopress.
Behaviour of expander when batteries are almost discharged:
If the battery charge diminishes, the expander will require significantly more time for the expanding
cycle. The rechargeable battery should be replaced or recharged as soon as possible.
22
1. Start button
2. Rechargeable battery
3. Expander head
Release button
4.